You are viewing : Home » Shop » SuperVAG - Key Programming Tools » SuperVag - Key

Share this on FacebookShare this on TwitterShare this on Google +
SuperVag - Key

SuperVag - Key

By Supervag  Ref: SVK001

Key programming tool for VW, Audi, Skoda and Seat cars

Does not include SVG149 and SVG157 cables

Works with MiraClone. Cars from 2008 to about 2012. Read information from car via OBD and this creates a bin file. Load this bin file to the MiraClone under Eeprom section. Select key you want to write. Select whether it is original key or our own ID48W then write. If it is our ID48W then go and start car. If it is original key then you need to update the car via the OBD and then start the car.

Communicate through OBD connector and makes it possible to read the PIN code (1999-) and component security (2006-) which is needed for the key programming.

Handle keys smartly!

  • displays the imobilizer identification
  • displays the imobilizer DTC (diagnostic trouble codes) memory
  • erases the imobilizer DTC (diagnostic trouble codes) memory
  • displays of the actual immobilizer state (incl. info about blocked imobiliser after several invalid passwords)
  • PIN and component security reading
  • cooperation with MiraClone and other transponder programming tools
  • key programming
  • remote control signal checking
  • remote control programming

New function of program KEY:

Function of sending LOG files (communication record): files can be selected by date.

You can send files from appropriate day everytime.

Function SuperVAG DeTeCtor.

SuperVAG DeTeCtor is new licence, which enables you to read every control unit in the car, read its trouble codes,

print it and erase it.

You can read and erase trouble codes on other control units as the immobilizer control unit.
You can find out simply if there are more problems (errors) in the car.

Automatic test - testing of all control units in the car, reading trouble codes and showing list (protocol) of results.

Results can be printed on the printer or saved to the file.

Erasing of trouble codes memory is possible.
You can erase Service intervalls on selected models.

There is another procedure for working with remote controls on the cars of VW Polo/up!/Škoda Fabia/citigo/SEAT Ibiza/Mii.

  • The comfort function is divided into two functions - erasing and learning.
  • Function Erase of all remote controls erases all remotes as well.
  • Function Add next remote control adds only the new remote control (not other remotes controls are needed at the moment).

Shows:

  • ID of transponders are learned
  • ID of transponder currently in the ignition
  • Mark of the vehicle
  • Operating state of the imobilizer
You may be interested in..