Click for larger image and other views

Mazda 8C Emulator

(Be the first reviewer)

Mazda 8C Emulator. Works with PC software programmer part number MSW001

FORD
Ranger 2000-2012

MAZDA
323 2000-2006
626 2000-2006
Demio 2000-2003
MPV 2000-2006
MX-5 2000-2005
Premacy 2000-2004
B2500 1999-2005
BT-50 <2005

Overview

The 8C Immobiliser Emulator is a complete plug-in replacement for the original equipment immobiliser units, made by Lucas / TRW or Mitsubishi Electric.
It uses the same connector, mounts on the same bracket, and once programmed to suit the vehicle can be swapped with the original part.
The only difference being that the 8C Emulator, once it senses ignition, communicates unconditionally with the engine ECU to allow the car to start - i.e., it doesn't look for a transponder, and will allow the car to start on a non-chip key.

The 8C Emulator will need to be programmed to suit a particular vehicle using the 8-digit PIN code.
The 8C Emulator can be reprogrammed if needed.

Process Overview

1) Remove Original Immobiliser
• No security brackets are usually fitted to the immobiliser.

2) Obtain PIN Code
• Using 8C Programmer (if vehicle can be started) *
• From dealer
• Diagnostic Programmer
• Reading the micro of the original immobiliser unit using an Eeprom reader.

3) Program 8C Emulatator With PIN Code
• Using the USB Programmer. No internet connection needed!


4) Fit the 8C Emulator on to the vehicle (in place of the existing immobiliser unit).