Click for larger image and other views
Miracle S10 All in One Key Cutting Machine
By Red Technologies Ref: MS10
Our new all in one key machine.
It has 2 end mill cutting heads so you can have two different cutters fitted. Like for example end mill cutter and dimple cutter.
Windows Surface Go tablet included
# Equipped tools and clamps
Decoder 4mm x 1, Endmill 2.0mm x 1 and Dimple Cutter x 1
S10 Automobile Key Clamp x 1 (VA2 Available)
S10 Replaceable Clamp (Dimple, HU66, SX9 and HU162T Available)
S10 Single Sided Key Clamp
# Additional accessories in the box
Power Adapter 24V 6A x 1
Power Cable x 1
USB Cable x 1
OTG Cable x 1
Endmill 2.0 mm x 1
M5 Bolt x 3
Wrench 2.5mm x 1
Decoder 6mm x 1 (Only for calibration)
Decoder 4mm x 1
Stopper x 1
Auxiliary Key Clamp Set x 1
Calibration Bar x 1
Tool Rack x 1
Spindle Belt 32mm x 2
Instruction Manual x 1
Surface Go Tablet x 1
Brush x 1
Mounting Bracket x 1
Ground Wiring x 1
Spacer Bar x 1
Back Bracket x 1
# Optional clamps (Separately Sold)
Magnum Key Clamp
Tubular Key Clamp
Tibbe Key Adapter
FO19 Adapter
If operating in a van then we suggest a minimum power requirement of the following....
At a minimum 2kw sine wave invertor, but we suggest 3KW
1-2 deep cycle batteries
intelligent split charger.
Any other lesser configuration can lead to incorrect cutting, doing strange things, maybe damaging the machine which will not be covered under any warranty.
32Kg
Please Log in or Register to View Our Prices
